Niskie napięcie w obwodzie sterowania zaworem wydechowym cylindra 2. Kod wskazuje na problem elektryczny w układzie dezaktywacji cylindrów.
P3455
WysokiLow voltage in the cylinder 7 exhaust valve control circuit. Manufacturer-specific code related to the cylinder deactivation system (AFM/MDS).
OBD-II (EN): Cylinder 7 Exhaust Valve Control Circuit Low Voltage
Code P3455 signals a problem in the electrical control circuit of the seventh cylinder's exhaust valve – most often in vehicles equipped with a cylinder deactivation system (GM AFM, Chrysler MDS). The cause is often a faulty solenoid, low oil pressure, or defective wiring. Due to the risk of engine damage, prompt diagnosis at a workshop with a professional scanner is recommended.
Symptoms
Check Engine or Service Engine Soon light Noticeable loss of engine power and performance Abnormal engine operation (misfire/hesitation) Increased fuel consumption Possible entry into limp mode
Possible causes
Faulty cylinder 7 Variable Valve Timing (VVT) solenoid Low engine oil level or insufficient oil pressure Clogged or blocked oil passage supplying the valve Damaged, chafed, or corroded control circuit wiring Poor contact or corrosion at the actuator electrical connector Faulty engine control module (ECM/PCM) – rare
Affected systems
Related codes
Problem z dezaktywacją cylindrów – Bank 1. Układ wyłączania cylindrów wykrył nieprawidłowość w obwodzie sterowania zaworami Bank 1.
Cylinder 4 – przerwa w obwodzie sterowania zaworem dolotowym dezaktywacji cylindra. PCM wykrył nieprawidłowe napięcie lub rezystancję w obwodzie kontrolnym zaworu dezaktywacji cylindra nr 4.
Obwód sterowania zaworem dolotowym cylindra 5 (dezaktywacja) – zbyt niskie napięcie. Problem z elektrycznym sterowaniem zaworu w systemie dezaktywacji cylindrów.
Does code P3455 require professional diagnostics?
The code alone is not enough. To find the cause, you need to read live data, check freeze frame conditions, and compare with vehicle behavior. Book a diagnostic session.
