Niskie napięcie w obwodzie sterowania zaworem wydechowym cylindra 2. Kod wskazuje na problem elektryczny w układzie dezaktywacji cylindrów.
P3435
ŚredniCylinder 5 intake valve control circuit (deactivation) – voltage too low. Problem with the electrical control of the valve in the cylinder deactivation system.
OBD-II (EN): Cylinder 5 Intake Valve Control Circuit Low
Code P3435 signals low voltage in the control circuit of the cylinder 5 intake valve responsible for cylinder deactivation (MDS, AFM systems). It most commonly affects GM, Chrysler, Dodge, and Jeep vehicles with V8 engines. Causes can include a faulty solenoid, wiring problem, or low oil pressure – diagnosis at an authorized service center is recommended.
Symptoms
Check Engine Light (MIL) illuminated Possible engine vibrations or hesitation Reduced power and driving performance Increased fuel consumption Possible cylinder 5 misfire Engine may not enter cylinder deactivation mode
Possible causes
Faulty cylinder 5 deactivation solenoid Low engine oil level or insufficient oil pressure Clogged or blocked oil passage to the valve Damaged, burnt, or corroded control circuit wiring Faulty connector or corrosion on terminals Faulty powertrain control module (PCM/ECM)
Affected systems
Related codes
Problem z dezaktywacją cylindrów – Bank 1. Układ wyłączania cylindrów wykrył nieprawidłowość w obwodzie sterowania zaworami Bank 1.
Cylinder 4 – przerwa w obwodzie sterowania zaworem dolotowym dezaktywacji cylindra. PCM wykrył nieprawidłowe napięcie lub rezystancję w obwodzie kontrolnym zaworu dezaktywacji cylindra nr 4.
Does code P3435 require professional diagnostics?
The code alone is not enough. To find the cause, you need to read live data, check freeze frame conditions, and compare with vehicle behavior. Book a diagnostic session.
