Usterka układu elektrycznego wspomagania kierownicy (EPS) lub czujnika kąta skrętu. Sterownik wykrył nieprawidłowe działanie lub brak sygnału z układu EPS.
C0365
WysokiDeceleration (braking) sensor fault. The sensor detecting sudden speed changes during braking reports incorrect operation or an out-of-range signal.
OBD-II (EN): Deceleration Sensor Malfunction
Code C0365 signals a fault in the deceleration sensor – a key component of the stability control system (ESC/ABS) that measures speed changes during braking. The cause could be a damaged sensor, a wiring problem, or an ABS controller failure. Due to its direct impact on the vehicle's active safety, we recommend diagnosis at a professional workshop as soon as possible.
Symptoms
ABS and/or ESC (Electronic Stability Control) warning light on the dashboard; deactivation of the stability control system (ESC/VSC/DSC); possible increased braking distance and reduced ABS effectiveness; 'Service Stability System' or similar message on the instrument cluster; in some vehicles, engine torque limitation.
Possible causes
• Damaged or faulty deceleration sensor (G-sensor / longitudinal acceleration sensor) • Open or short circuit in the wiring leading to the deceleration sensor • Oxidized or loose sensor connector • ABS/ESC module damage (EBCM/HECU controller) • Mechanical damage to the sensor due to collision or body corrosion
Affected systems
Related codes
Uszkodzenie obwodu silnika pompy ABS. Sterownik EBCM wykrył nieprawidłowość w obwodzie silnika pompy modulatora ciśnienia hamulców (BPMV).
Code C0365 appears in these brands
Go to messages and symptoms for your brand — there we analyze this code together with other typical alerts.
Does code C0365 require professional diagnostics?
The code alone is not enough. To find the cause, you need to read live data, check freeze frame conditions, and compare with vehicle behavior. Book a diagnostic session.
