C0265Wysoki
Uszkodzenie obwodu przekaźnika silnika EBCM (Electronic Brake Control Module). Kod wskazuje na awarię przekaźnika zasilającego pompę silnika układu ABS.
Podwozie
Sprawdź szczegóły →C0110
WysokiDamage to the ABS Pump Motor Circuit. The EBCM controller detected an abnormality in the Brake Pressure Modulator Valve (BPMV) pump motor circuit.
OBD-II (EN): Pump Motor Circuit
Code C0110 signals a failure in the ABS pump motor circuit – the vehicle's computer detected incorrect operation or a lack of signal from the brake pressure modulator pump. The cause may be a worn ABS pump motor, damaged relay, wiring harness fault, or EBCM module failure. Due to the direct impact on braking effectiveness, prompt diagnosis at a workshop is recommended.
Symptoms
- ABS warning light illuminated on the dashboard - ESP/DSC/StabiliTrak warning light illuminated - ABS system inactive (disabled) - Traction control system (TCS) may not work - Possible increased stopping distance in emergency situations - OBD scanner shows code C0110 in the brake controller
Possible causes
- Damaged ABS pump motor in the BPMV module (most common cause) - Blown or damaged pump motor relay in the EBCM module - Open or short circuit in the electrical wiring powering the ABS pump - Corrosion or damage to the EBCM/BPMV module electrical connector - Damaged Electronic Brake Control Module (EBCM) – internal failure
Affected systems
Related codes
Code C0110 appears in these brands
Go to messages and symptoms for your brand — there we analyze this code together with other typical alerts.
Does code C0110 require professional diagnostics?
The code alone is not enough. To find the cause, you need to read live data, check freeze frame conditions, and compare with vehicle behavior. Book a diagnostic session.