Komunikacja z ECU — usterka łącza szeregowego (CAN)
U1130
WysokiIncorrect or missing data for the fuel system on the SCP (J1850) network. Network communication error of the control modules.
OBD-II (EN): Fuel System Data Invalid or Missing on SCP (J1850) Bus
Code U1130 signals a communication problem on the SCP (J1850) network – the system is not receiving correct data regarding the fuel system. The cause could be a damaged wiring harness, connector corrosion, or a faulty control module. Professional diagnosis using a workshop scanner is recommended to precisely locate the source of the fault.
Symptoms
Check engine light (MIL) on; possible engine performance problems (rough running, hard starting); reduced engine power; problems with the fuel management system may occur; in some cases, failure of communication modules (e.g., CD changer).
Possible causes
• Damaged or intermittent SCP (J1850) communication bus – short circuit, open circuit, or corrosion in the wiring harness • Faulty control module (PCM, ECM, or other network node) not responding to requests for fuel system data • Corroded or loose electrical connectors on the CAN/SCP network • Defect of the communication module itself (e.g., CD changer module or other network node) • Power supply or ground disturbances of the network modules (poor grounding, low voltage)
Affected systems
Related codes
Utrata komunikacji z ECM (sterownik silnika)
Magistrala CAN High Speed — brak komunikacji
Code U1130 appears in these brands
Go to messages and symptoms for your brand — there we analyze this code together with other typical alerts.
Does code U1130 require professional diagnostics?
The code alone is not enough. To find the cause, you need to read live data, check freeze frame conditions, and compare with vehicle behavior. Book a diagnostic session.
