Czujnik ciśnienia w szynie paliwowej — usterka obwodu
P3315
WysokiFault in the Fuel Rail Pressure Sensor Circuit. Manufacturer code indicates an incorrect signal or open circuit in the fuel pressure sensor circuit.
OBD-II (EN): Fuel Rail Pressure Sensor Circuit Malfunction
Code P3315 signals a fault in the fuel rail pressure sensor circuit – a key component for correct fuel metering by the injectors. The cause may be a damaged sensor, wiring problem, or pressure drop in the fuel system. Due to the impact on driving safety and engine operation, prompt diagnosis at a workshop with a professional OBD scanner is recommended.
Symptoms
Difficulty starting the engine, rough engine idle, noticeable jerking during acceleration, increased fuel consumption, possible engine entry into limp mode, MIL (Check Engine) light on.
Possible causes
• Damaged or faulty fuel rail pressure sensor • Open or short circuit in the sensor circuit wiring • Corroded or loose sensor electrical connectors • Low fuel pressure caused by a faulty fuel pump or pressure regulator • Contamination of the fuel system causing incorrect sensor readings
Affected systems
Related codes
Does code P3315 require professional diagnostics?
The code alone is not enough. To find the cause, you need to read live data, check freeze frame conditions, and compare with vehicle behavior. Book a diagnostic session.
