Hybspec

P1805

Średni

Clutch pedal position switch – incorrect signal or circuit. Manufacturer code mainly for Nissan and Infiniti vehicles.

OBD-II (EN): Clutch Pedal Position Switch Circuit Malfunction

Code P1805 indicates an irregularity in the clutch pedal position switch circuit – a typical fault in Nissan and Infiniti models. The cause may be a worn switch, mechanical play in the pedal assembly, or a control module adaptation issue. We recommend diagnosis at a workshop with a dedicated scanner for Nissan/Infiniti vehicles.

Symptoms

Incorrect idle speed (too high or fluctuating), possible cruise control issues, occasional jerking or engine stalling when pressing the clutch, MIL (check engine light) on the dashboard.

Possible causes

• Worn or damaged clutch pedal switch (mechanically worn) • Mechanical play on the pedal pivot or bent switch mounting bracket • Dirt or corrosion on switch contacts causing improper closure • Incorrect idle adaptation after sensor/switch replacement (missing initialization procedure) • Outdated or faulty ECM firmware (engine control module)

Affected systems

układ sprzęgłasterownik silnika (ECM)układ biegu jałowegoTempomat (Cruise Control)

Related codes

P1800Wysoki

Kod producenta P1800 — usterka układu sprzęgła/skrzyni biegów lub zmiennych faz rozrządu (VVT). Znaczenie zależy od marki pojazdu (Kia, Ford, Volvo i inne).

Układ napędowy
Sprawdź szczegóły →

Does code P1805 require professional diagnostics?

The code alone is not enough. To find the cause, you need to read live data, check freeze frame conditions, and compare with vehicle behavior. Book a diagnostic session.