Hybspec

P1415

Średni

Secondary Air Injection (AIR) System – Bank 1 – Air Pump Circuit Malfunction.

Fault code P1415 indicates a problem with the secondary air injection (AIR) system on engine bank 1. This system pumps fresh air into the exhaust manifold during cold starts to help heat the catalytic converter faster and reduce emissions. The most common causes are a faulty air pump, blown fuse, faulty wiring, or a blocked check valve – further diagnosis requires specialized equipment and technical knowledge.

Symptoms

Check Engine light is on; during cold start, the engine may run rough or have reduced power; possible worsening of emission test results; in some cases, a smell of unburned fuel from a cold engine.

Possible causes

Faulty or blocked secondary air pump. Blown AIR pump fuse. Faulty wiring or corroded connectors at the pump or relay. Faulty air pump relay. Leaking, cracked, or disconnected vacuum/pressure hoses in the AIR system. Contaminated or blocked check valve in the air injection system.

Affected systems

Układ wtrysku powietrza wtórnego (AIR)Układ wydechowyUkład sterowania silnikiem (PCM/ECM)System kontroli emisji spalin

Related codes

Manufacturer variants

Manufacturer variants (extensions):

Does code P1415 require professional diagnostics?

The code alone is not enough. To find the cause, you need to read live data, check freeze frame conditions, and compare with vehicle behavior. Book a diagnostic session.