C1210Wysoki
Usterka elektryczna cewki zaworu wylotowego ABS – prawy przedni. Moduł ABS wykrył nieprawidłowość w obwodzie sterującym prawego przedniego zaworu wylotowego układu przeciwblokującego.
Podwozie
Sprawdź szczegóły →C1185
WysokiFailure of the ABS power relay output circuit. The ABS controller has detected incorrect voltage or an open circuit in the relay circuit supplying the anti-lock braking system module.
OBD-II (EN): ABS Pump Relay Output Circuit Malfunction
Code C1185 signals a failure in the ABS power relay circuit, which may cause the anti-lock braking system and traction control to disable. The most common cause is a faulty relay, blown fuse, or wiring problem. Due to the direct impact on braking safety, immediate diagnosis at a workshop equipped with a professional ABS scanner is recommended.
Symptoms
Illuminated ABS and/or ESP warning light on the dashboard, lack of ABS system operation during hard braking, deactivation of the traction control system (TCS) and electronic stability control (ESP/ESC), extended stopping distance on slippery surfaces, lack of assistance when starting on icy or wet surfaces, possible loss of power steering assist (in vehicles with EPS linked to ABS).
Possible causes
• Damaged or blown ABS module power relay • Open circuit or short circuit in the ABS relay circuit wires • Corrosion or oxidized contacts in the relay or ABS module connector • Damaged ABS control module (EBCM/HECU) • Discharged battery or unstable voltage in the vehicle's electrical system
Affected systems
ABS (Anti-lock Braking System)ESP / ESC (Electronic Stability Control)TCS (Traction Control System)Układ hamulcowyInstalacja elektryczna pojazdu
Related codes
U0121Wysoki
Utrata komunikacji z modułem ABS
Komunikacja sieciowa
Sprawdź szczegóły →Does code C1185 require professional diagnostics?
The code alone is not enough. To find the cause, you need to read live data, check freeze frame conditions, and compare with vehicle behavior. Book a diagnostic session.