Błąd czujnika prędkości koła prawego tylnego – uszkodzenie obwodu. Moduł ABS nie otrzymuje prawidłowego sygnału z czujnika prędkości koła prawego tylnego, co może dezaktywować systemy ABS i trakcji.
C1175
WysokiFailure of the left rear wheel speed sensor input circuit (LR). The ABS module is not receiving a correct signal from the wheel speed sensor.
OBD-II (EN): Left Rear Wheel Speed Sensor Input Circuit Malfunction
Code C1175 indicates a detected failure in the left rear wheel speed sensor circuit – a key component of the ABS and stability control systems. The cause may be a faulty sensor, chafed wiring harness, or worn tone ring on the hub. Due to the impact on braking performance, diagnosis at a workshop is recommended before further driving.
Symptoms
Illuminated ABS warning light on the dashboard, deactivation of the anti-lock braking system (ABS), deactivation of the electronic stability control system (ESP/DSC/VSC), possible illumination of the traction control light (TCS), in some vehicles, limitation of EBD brake system operation.
Possible causes
• Damaged or worn left rear wheel speed sensor (mechanical crack, corrosion, dirt) • Open circuit or short circuit in the ABS sensor wiring harness (cable damage, insulation chafing) • Corroded or damaged sensor electrical connector • Damaged tone ring (reluctor ring) on the hub or axle shaft – chips, rust, metal filings • Excessive mounting clearance of the ABS sensor relative to the tone ring • Less common: damage to the ABS/ESP module
Affected systems
Related codes
Does code C1175 require professional diagnostics?
The code alone is not enough. To find the cause, you need to read live data, check freeze frame conditions, and compare with vehicle behavior. Book a diagnostic session.
